Mjk-automation Shuttle Ultrasonic Level Transmitter and Sensor Uživatelský manuál stáhnout pdf (Strana 47)

SW 838023

GB Shuttle Manual 100316

Appendix

Bar graph read-out

This function is used to select whether the bar graph should

follow the analog output or the level read-out.

Changes will not have inﬂuence on the relay settings.

Shuttle

reverts to normal read-out.

Note: If the mA settings are inverted (the level reference

at 4 mA is set higher than the level reference at

20 mA), the bar graph will increase when the level

decreases and vice versa.

The bargraph follows the analog output.

The bar graph follows the level read-out.

Note: If the active measuring range has been decreased

to e.g. 1,45 - 3 m (see next page), the range of

the bar graph will be changed accordingly (all seg-

ments lit at 3 m and all segments off at 1,45 m.)

The bar graph is deactivated.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 69 70

Žádné komentáře

Mjk-automation Shuttle Ultrasonic Level Transmitter and Sensor Uživatelský manuál Strana 47